This mini excavator can:
- Dig with the 20 cm and 30 cm digging buckets,
- Dredge, load and level out with the 60 cm bucket,
- Plow and remove roots with the ripper tooth,
- Drill with the auger drilling attachments,
- Move wood and other materials with the 800 kg and 1.5 T grapples.
This excavator is compatible with all tractors between 7 and 40 HP with a power take-off of 540 t/ min.
It is fully mechanical, it has no electronic system.
With the purchase of a RETRO EXCAVATOR, CHARGEUR PLUS will give you a 30 cm bucket for free.
TECHNICAL DESCRIPTIVE - PR-1500-P
- Empty weight: 300 kgs
- Total height (folded arm): 1,700 mm
- Total width: 820 mm
- Total length: 1,150 mm
- Boom swing: 42° to the right / 79° to the left
- Maximum height (at the ground): 2,000 mm
- Maximum depth (at the ground): 1,900 mm
- Maximum length (from the chassis): 2,400 mm
- Ripping strength: 1.5 T
- Strengthened arm
- Power take-off multiplier
- The drive shaft is not included (see options)
- Hydraulic system: pivoting power take-off
- Hydraulic pump: double pump 6 + 6cc
- Professionals hydraulics outlet - operating pressure: 160 bars
- Flow: 21 l/min
- Hydraulic tank capacity: 11.9 l
- The hydraulic sustainers can be set to 40 cm high
- Professionals distributor and hydraulic engine.
- The axle spread of the rear lifting boom must be 53 cm (for ﬁxing the excavator) and the power of tractor: category 1.
- Oil level dipstick
- Filtration 25 µm
In order to approved your order, 300€ deposit will be asked.
Delivery date*: Assemble version 10 weeks
*: according to provision and transport period