The Sphinx can:
- Dig with the 20 cm and 30 cm digging buckets,
- Dredge, load and level out with the 60 cm bucket,
- Load and transport with the loading bucket,
- Plow and remove roots with the 1 teeth and 4 tooth ripper tooth,
- Drill with the 100, 150 and 200 diameter of auger drilling attachments,
- Move wood and other materials with the 800 kg grapple,
- Break up concrete with an hydraulic hammer,
- Split wood with his log splitter,
- Clear the way with the snow plow.
It is fully mechanical and hydraulic, and has no electronic system.
With the purchase of a SPHINX P+, CHARGEUR PLUS will give you a 30 cm bucket, a bucket quick couppler, a gripper fingers above the bucket, an additional hydraulic line, a hydraulic cooler.
STANDARD TECHNICAL DESCRIPTIVE MPT-82-1500-P+
- Empty weight: 790 kgs
- Total length: 2,400 mm
- Track width: 820 mm
- Total height: 2,300 mm
- Digging capacity: 1.5 T
- Maximum digging depth: 1,700 mm
- Rotating turret swing: 360° (pivoting joint)
- Sustainers included (elephant foot)
- Hydraulic boom swing: -55°/ +55°
- Digging height: 1,700 mm
- Maximum length (from the chassis): 2,300 mm
- Strengthened arm
- Professional 14 HP petrol engine (Kholer type)
- Engine with electrical ignition and battery
- Net power: 10.3 kW
- Engine size: 429 cc
- Consumption (fully charged): 3 l/h
- Fuel tank capacity: 7.4 l
- Side hydraulic controls
- Hydraulic pump: 4,8 cc double gear pump
- Professional hydraulic outlet - operating pressure: 160 bars
- Flow: 3 600 rpm (34,5 L/mn)
- Professional traction motor: orbital 250 cc (ultra strengthened)
- Hydraulic tank capacity: 40 l
- Hydraulic cooler
- Original tracks: 180x72x43
- Adjustable seat with microswitch
- Ergonomic controls
- Oil level dipstick
- Hour Counter
- LED Headlights
In the Welding kit version, hydraulic oil and paint are not supplied.
In the Mounting kit version, hydraulic oil is not supplied.
In order to approved your order, 800€ deposit will be asked.
For grapple, auger and log splitter: the additional hydraulic line is required.
For extendable arm: additional hydraulic line, Push-Pull and counterweights are required.
For loading bucket: the Push-Pull is required. For retrofit installation price of Push Pull is 165€ excl. taxes.
For the use of hydraullic hammer: counterweight, support and hydraulic cooler are required.
Counterweight is recommended when adding an accessory.
Option electrical motor.
Just the assembly version is seeling.